ADSL

目录·定义
·分类
·ADSL与CableModem的比较
·ADSL掉线处理方法
·错误代码说明




定义
ADSL (Asymmetric Digital Subscriber Line )(非对称数字用户线路)被欧美等发达国家誉为“现代信息高速公路上的快车”,因具有下行速率高、频带宽、性能优等特点而深受广大用户的喜爱,成为继Modem、ISDN之后的一种全新更快捷、更高效的接入方式。



  ADSL是一种非对称的DSL技术,所谓非对称是指用户线的上行速率与下行速率不同,上行速率低,下行速率高,特别适合传输多媒体信息业务,如视频点播(VOD)、多媒体信息检索和其他交互式业务。ADSL在一对铜线上支持上行速率512Kbps~1Mbps,下行速率1Mbps~8Mbps,有效传输距离在3~5公里范围以内。



分类


  现在比较成熟的ADSL标准有两种——G.DMT和G.Lite。G.DMT是全速率的ADSL标准,支持8Mbps/1.5Mbps的高速下行/上行速率,但是,G.DMT要求用户端安装POTS分离器,比较复杂且价格昂贵;G.Lite标准速率较低,下行/上行速率为1.5Mbps/512Kbps,但省去了复杂的POTS分离器,成本较低且便于安装。就适用领域而言,G.DMT比较适用于小型或家庭办公室(SOHO),而G.Lite则更适用于普通家庭用户。



  ADSL是目前众多DSL技术中较为成熟的一种,其带宽较大、连接简单、投资较小,因此发展很快,目前国内广州、深圳、上海、北京、成都等地的电信部门已先后推出了ADSL宽带接入服务,而区域性应用更是发展快速,但从技术角度看,ADSL对宽带业务来说只能作为一种过渡性方法。

ADSL(Asymmetric Digital Subscriber Line,非对称数字用户线)是一种通过现有普通电话线为家庭、办公室提供宽带数据传输服务的技术。ADSL即非对称数字信号传送,它能够在现有的铜双绞线,即普通电话线上提供高达8Mbit/s的高速下行速率,{由于ADSL对距离和线路情况十分敏感,随着距离的增加和线路的恶化,速率会受到影响}远高于ISDN速率;而上行速率有1Mbit/s,传输距离达3km----5km。ADSL技术的主要特点是可以充分利用现有的铜缆网络(电话线网络),在线路两端加装ADSL 设备即可为用户提供高宽带服务。ADSL的另外一个优点在于它可以与普通电话共存于一条电话线上,在一条普通电话线上接听、拨打电话的同时进行ADSL传输而又互不影响。用户通过ADSL接入宽带多媒体信息网与因特网,同时可以收看影视节目,举行一个视频会议,还可以很高的速率下载数据文件,这还不是全部,你还可以在这同一条电话线上使用电话而又不影响以上所说的其它活动.安装ADSL也极其方便快捷。在现有的电话线上安装ADSL,除了在用户端安装 ADSL通讯终端外,不用对现有线路作任何改动。使用ADSL(Asymmetric Digital Subscriber Line,非对称数字用户线)技术,通过一条电话线,以比普通MODEM快一百倍浏览因特网,通过网络学习、娱乐、购物,享受到先进的数据服务如视频会议、视频点播、网上音乐、网上电视、网上MTV的乐趣,已经成为现实。



DSL(数字用户线路,DigitalSubscriberLine)是以铜质电话线为传输介质的传输技术组合,它包括HDSL、SDSL、VDSL、 ADSL和RADSL等,一般称之为xDSL。它们主要的区别就是体现在信号传输速度和距离的不同以及上行速率和下行速率对称性的不同这两个方面。



HDSL与SDSL支持对称的T1/E1(1.544Mbps/2.048Mbps)传输。其中HDSL的有效传输距离为3-4公里,且需要两至四对铜质双绞电话线;SDSL最大有效传输距离为3公里,只需一对铜线。比较而言,对称DSL更适用于企业点对点连接应用,如文件传输、视频会议等收发数据量大致相应的工作。同非对称DSL相比,对称DSL的市场要少得多。



VDSL、ADSL和RADSL属于非对称式传输。其中VDSL技术是xDSL技术中最快的一种,在一对铜质双绞电话线上,上行数据的速率为13到 52Mbps,下行数据的速率为1.5到2.3Mbps,但是VDSL的传输距离只在几百米以内,VDSL可以成为光纤到家庭的具有高性价比的替代方案,目前深圳的VOD(Videoondemand)就是采用这种接入技术实现的;ADSL在一对铜线上支持上行速率640Kbps到1Mbps,下行速率 1Mbps到8Mbps,有效传输距离在3-5公里范围以内;RADSL能够提供的速度范围与ADSL基本相同,但它可以根据双绞铜线质量的优劣和传输距离的远近动态地调整用户的访问速度。正是RADSL的这些特点使RADSL成为用于网上高速冲浪、视频点播(IAV)、远程局域网络(LAN)访问的理想技术,因为在这些应用中用户下载的信息往往比上载的信息(发送指令)要多得多。



据CNNIC(中国国家网络信息中心)统计,截至1997年10月31日,中国上网用户数达62万,其中49.1%的用户认为Internet最令人失望的地方是网上速度太慢,36.2%的用户则认为是上网收费太贵;而截至1998年6月30日,在不到一年的时间里,以上三个统计数字都将近翻了一番,分别是:117.5万,88.9%,61.2%。由此可见,随着中国Internet上网用户数的飞速膨胀,网上速度太慢和收费太贵愈发成为中国 Internet发展的两大障碍。



ADSL接入服务能做到较高的性能价格比这一点,与ADSL接入技术较其它接入技术具有其独特的技术优势是分不开的。下面看看ADSL与其它接入服务的比较:





ADSL与CableModem的比较




与CableMode相比,ADSL技术具有着相当大的优势。CableModem的HFC接入方案采用分层树型结构,其优势是带宽比较高(10M),但这种技术本身是一个较粗糙的总线型网络,这就意味者用户要和邻近用户分享有限的带宽,当一条线路上用户激增时,其速度将会减慢。再者,有关资料表明,大部分情况下,HFC方案必需兼顾现有的有线电视节目,而占用了部分带宽,只剩余了一部分可供传送其它数据信号,所以CableModem的理论传输速率只能达到一小半。国外公司实验表明,其速率减为1M-2Mbps,更常见的是400K-500Kbps。综合来看,即使在理想状态下,HFC只相当于一个 10Mbps的共享式总线型以太网,而ADSL接入方案在网络拓扑结构上较为先进,因为每个用户都有单独的一条线路与ADSL局端相连,它的结构可以看作是星型结构,它的数据传输带宽是由每一用户独享的。



ADSL与普通拨号Modem及N-ISDN的比较:



A)比起普通拨号Modem的最高56K速率,以及N-ISDN128K的速率,ADSL的速率优势是不言而喻的。



B)与普通拨号Modem或ISDN相比,ADSL更为吸引人的地方是:它在同一铜线上分别传送数据和语音信号,数据信号并不通过电话交换机设备,减轻了电话交换机的负载,并且不需要拨号,一直在线,属于专线上网方式。这意味着使用ADSL上网并不需要缴付另外的电话费。



不对称数字用户线(ADSL)

ADSL可以向用户提供6Mbps以上的数据传输带宽,这一条件已经足以实现Internet接入、视频点播和访问局域网。在交互模式下ADSL能够达到640 kbps的双向传输速率。ADSL技术把现有公共电话网络的数据传输带宽提高了50倍。

ADSL技术

ADSL通过普通电话线传输数据的速度几乎比今天的调制解调器快200倍,比ISDN快90倍。全球范围内的早期测试和实验都表明,ADSL是一种大有希望的接入技术。







ADSL掉线处理方法




  ADSL掉线涉及到多方面的问题,包括线路故障(线路干扰)、ADSL Modem故障(发热、质量、兼容性)、网卡故障(速度慢、驱动程序陈旧)等等。运营商与用户应做以下常规检查:ADSL电话线接头是否稳妥可靠:是否远离电源线和大功率电子设备;ADSL入户线和分离器之间是否安装电话分机、传真机、计费器等设备:是否正确安装分离器;淘汰老式的ISA网卡,换成10/100M的PCI网卡及最新驱动程序;ADSL Modem散热是否良好;ADSL Modem指示灯状态是否正常。   ADSL掉线的原因和处理方法如下:  

(1)接地线质量问题。   PC接地性能一定要好。否则静电会影响ADSL的传输速率甚至会引起掉线。一般PC接地电阻应小于10Ω。另外,由于施工时电源布放不规范,有的没有接地线,或地线质量不合格,也会影响网络设备的正常使用,甚至出现掉线问题,应及时整改。   

(2)线路有强干扰源。   距离用户电缆线路100m内的无线电发射塔、电焊机、电车或高压电力变压器等强信号干扰源,使用户下线接收杂波(铜包钢线屏蔽弱.接收信号能力强),对用户线引起强干扰。受干扰的信号往往是从无屏蔽的下线部分进入,因为中继电缆有屏蔽层,干扰影响很小,如果在干扰大的地方用一些带屏蔽的下线,就会减少因干扰造成的速率不稳定或掉线。另外,电源线不可与ADSL线路并行,以防发生串扰导致ADSL故障。   

(3)网卡质量不稳定。   故障现象是网络只要一断开,再也连不上。用户Modem的DSL灯常亮,基本排除线路故障,问题多数出在网卡上。如果排除了网线、微机、插槽的问题,一般为网卡质量不稳定,应及时更换网卡。   

(4)用户线路距离远。   不规则掉线多由线路质量差或距离远引起,可用ADSL测试仪测试信号衰减和干扰强弱,找出比较好的线路替换。一般用户中继线路不应超过5km,从分线箱进入用户房间的电话下线不应超过100m。   

(5)能上网,但电话掉线。   原因多为交接间端子板线卡断,因断线头和端子板距离很近,因此数据感应能通过,而语音过不去;如用户距局端很近,室内线混线也可造成上述故障。   

(6)上网、通话不兼顾。   一般为外线绝缘不良或有接头接触不良。用户端外线绝缘不良,用户上网时一拿电话手柄告警灯就闪,WAN灯熄灭,修好外线后故障立刻解除。   

(7)能通话,但上网掉线。   一般用户接错线的情况是把接Modem的线接在话机上,就会出现话机能用,而上网掉线。这时ADSL Modem状态灯LINE灯不亮。在查故障时应先仔细查看设备使用接线位置,平时尽量少变动,以免接错线。   

(8)错误串电话分机。   由于不正确串接电话分机,从而造成串扰,引起上网数据畸变。如果必须使用电话分机,则应串接一个分离器。







错误代码说明




602 The port is already open.

This error usually occurs under Windows 95/98 and indicates that there is no dial-up adapter present in the Network applet of the Control Panel. To resolve the problem, remove WinPoET, add a dial-up adapter, and then restart the PC.

You may also receive this error if you attempt to connect when WinPoET is already connected.

602错误,端口已经打开。原因:计算机上没有安装拨号网络,或连接已经连接。



604 Wrong information specified.

You have entered an incorrect user name or password. Try again.

604错误,你输入了不正确的用户名或密码。



617 The port or device is already disconnecting.

This error usually occurs under Windows 95/98 and indicates that there is no dial-up adapter present in the Network applet of the Control Panel. To resolve the problem, remove WinPoET, add a dial-up adapter, and then restart the PC.

617错误,端口已经断开。原因计算机没有拨号网络。



618 The port is not open.

This error usually occurs on Windows 95/98 and indicates that there is no dial-up adapter present in the Network applet of the Control Panel. To resolve the problem, remove WinPoET, add a dial-up adapter, and then restart the PC.

618错误,端口没有打开。原因计算机没有拨号网络。



619 The port is disconnected.OR The specified port is not connected.

This error could indicate a problem with your Internet Service Provider (ISP). Contact your ISP for assistance.

619错误,ISP错误,联系ISP以寻求帮助。



621 Cannot open the phone book file.

This error occurs on Windows NT 4.0 Workstation or Server. To resolve the problem, go the RAS settings and configure the iVasion PoET adapters for dial-out only.

621错误,不能打开电话本。解决:修改RAS的设置,使虚拟网卡可以拨出。



622 Cannot load the phone book file.

Same as error 621.

622错误,不能加载电话本。



623 Cannot find the phone book entry.

Same as error 621.

623错误,没找到电话本



624 Cannot write the phone book file.

Same as error 621.

624错误,不能写电话本文件



625 Invalid information in the phone book.

Same as error 621.

625错误,电话本中含有无效信息。



629 The port was disconnected by the remote machine.

You have entered an incorrect user name or password. Try again.

?OR ?The connection is not valid (for example, the cable is unplugged).

629错误,连接被远程计算机中断。原因;你输入了不正确的用户和密码,或连接是无效的(电缆被拔出)



630 The port was disconnected due to hardware failure.

This error occurs if you try to connect when WinPPPoverEthernet.exe is not running or is not fully loaded. Wait a moment and try again.

630错误,硬件故障。



631 The port was disconnected by the user.

You clicked Cancel on the WinPoET Dialer dialog box.

631错误,连接被用户中断。



633 The port is already in use or is not configured for Remote Access dial out.

On Windows 95/98, refer to error number 602 for information.

On Windows NT 4.0, refer to error number 621 for information.

633错误,端口正被使用。



634 Cannot register your computer on the remote network.

You have entered an incorrect user name or password. Try again.

?OR ?There is a problem with your ISP. Contact them for assistance.

634错误,不能在远程网络注册你的计算机。原因;你输入了错误的用户和密码,或ISP问题。



645 Internal authentication error.

Typically, this error occurs if you have not appended your user name with the correct AC-specified context. ?OR ?No dial-up adapter is installed. See Installing the iVasion PoET Adapter for Windows NT.

645错误,内部认证错误。



646 The account is not permitted to log on at this time of day.

Your account is time-restricted. Try again during your designated time period.

646错误,帐号此时不可使用,你的帐号有使用时间限制。



647 The account is disabled.

Your account is disabled. Contact your ISP for assistance.

647错误,帐号被禁止。



648 The password has expired.

Your password has expired. Contact your ISP for assistance.

648错误,密码已经到期。



649 The account does not have Remote Access permission.

You probably have entered an incorrect user name or password. Try again.

649错误,帐号没有远程访问许可,



651 Your modem (or other connecting device) has reported an error.

You may have either incorrectly installed WinPoET or removed the iVasion PoET adapter (in Windows 95/98). Remove WinPoET, restart your PC, and then install WinPoET again.

651错误,MODEM或连接设备报告错误。



652 Unrecognized response from the device.

You may have either incorrectly installed WinPoET or removed the iVasion PoET adapter (in Windows 95/98). Remove WinPoET, restart your PC, and then install WinPoET again.

652错误,无效的设备应答。



665 The port is not configured for Remote Access.

This error occurs under Windows NT (WKS or SVR). The solution is to go into the RAS settings and configure the iVasion PoET adapters for dial-out only, as well as the TCP/IP protocol only.

665错误,端口未被配置为可使用RAS。



678 No Response

678错误,远程计算机没有回应



691 Access denied because username and/or password is invalid on the domain.

You have entered an incorrect user name or password. Try again.

691错误,访问拒绝,因为用户或密码在域上无效。



692 Hardware failure in port or attached device.

This error occurs if you try to connect when WinPPPoverEthernet.exe is not running or is not fully loaded. Wait a moment and try again.

?OR ?On Windows NT, you may have reinstalled WinPoET without removing the previous installation adapters.

692错误,硬件错误。



708 The account has expired.

Your account has expired. Contact your ISP for assistance.

708错误,帐号已经到期。



711 RasMan initialization failure. Check the event log.

This error may occur on Windows NT. Reapply the Microsoft Windows NT Service Pack.

711错误,RAS管理初始化失败。



718 PPP timeout.

You have entered an incorrect user name or password. Try again.

?OR ?The connection is not valid (for example, the cable is unplugged).

718错误,PPP超时。原因:用户密码错误或连接无效。



719 PPP terminated by remote machine.

Although a valid connection is detected, it is not working. Contact your ISP for assistance.

719错误,PPP被远程机器中断。原因;虽然检测到有效的连接,但该连接不可工作,联系ISP请求帮助。



720 No PPP control protocols configured.

This error is generated when there is an Access Concentrator (AC) problem with your ISP; contact them for assistance.

720错误,没有PPP控制协议。该错误产生于ISP的AC(访问集中器)故障。联系ISP。



721 Remote PPP peer is not responding.

You have entered an incorrect user name or password. Try again.

?OR ?The connection is not valid (for example, the cable is unplugged).

721错误,远程PPP没有响应。



734 The PPP link control protocol has been terminated.

This error occurs on Windows NT if NetBIOS is not installed. In the Network applet of the Control Panel, install the NetBIOS Interface service.

734错误,PPP连接控制协议被终止。该错误通常发生在NT中没有安装NETBIOS时。



735 The requested address was rejected by the server.

You may have entered an IP address in the phone book entry. Remove the IP address and try again.

735错误,请求的地址被服务器拒绝。



739 The remote server cannot use the Windows NT encrypted password.

You may have selected an NT encrypted password in the phone book entry. Clear this check box and try again.

739错误,远程服务器不能使用加密口令。你可能选择了加密口令,请使用明文或可被服务器接受的口令方式。



751 Error occurred during dialing. Error code = 751. Extended error code = 0.

Both dial -up adapters are already in use by other connections.

751错误,拨号时发生错误。原因;所有的拨号网络都在被其他连接使用。



752 Error occurred during dialing. Error code = 752. Extended error code = 0.

This error occurs if the TCP/IP bindings have been removed from the Ethernet card. To resolve the problem, restart your computer.

752错误,拨号时发生错误。原因:网卡上TCP/IP协议绑定被删除了。



769错误,无法连接到指定目标。 网卡禁用



说明:本错误代码是WINDOWS拨号网络的通用错误,适用范围是一切拨号网络,包括ADSL的WINPOET虚拟拨号。











Copyright © 1999-2024 C114 All Rights Reserved | 联系我们 | 沪ICP备12002291号-4